Please use this identifier to cite or link to this item: https://doi.org/10.1109/FCS.2012.6243601
Title: SAW filters with reconfigurable transition bands
Authors: Lu, X.
Mouthaan, K. 
Galipeau, J.
Briot, E.
Abbott, B.
Issue Date: 2012
Source: Lu, X.,Mouthaan, K.,Galipeau, J.,Briot, E.,Abbott, B. (2012). SAW filters with reconfigurable transition bands. 2012 IEEE International Frequency Control Symposium, IFCS 2012, Proceedings : 646-649. ScholarBank@NUS Repository. https://doi.org/10.1109/FCS.2012.6243601
Abstract: A surface acoustic wave (SAW) filter with a reconfigurable upper transition band is presented. This is achieved through the reuse of SAW resonators by incorporating single pole double throw (SPDT) GaAs switches. The reconfigurable filter with two states is demonstrated around the 700 MHz frequency range currently allocated to LTE bands. The EM simulation results are obtained from a 3D EM model built in Ansys HFSS. Fabricated SAW dies and GaAs switch dies are assembled in a 7×9×1.4 mm 3 SMP package. Measured results agree well with the EM simulations. In the first state the center frequency is 687.8 MHz and the BW is 2.4%. In the second state the center frequency is 691.1 MHz and the BW is 3.4%. The shift in the upper transition band is 0.95%. © 2012 IEEE.
Source Title: 2012 IEEE International Frequency Control Symposium, IFCS 2012, Proceedings
URI: http://scholarbank.nus.edu.sg/handle/10635/84154
ISBN: 9781457718199
DOI: 10.1109/FCS.2012.6243601
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

4
checked on Mar 7, 2018

Page view(s)

40
checked on Mar 9, 2018

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.