Please use this identifier to cite or link to this item:
|Title:||Design of the layer structures for Schottky type AlGaN UV photodetector|
|Citation:||Kim, B.-K., Kim, J.-K., Park, S.-J., Lee, H.-B., Lee, J.-H., Rue, G.-H., Lee, M.-B., Lee, Y.-H., Lee, J.-H., Hahm, S.-H. (2003). Design of the layer structures for Schottky type AlGaN UV photodetector. Physica Status Solidi C: Conferences (7) : 2309-2313. ScholarBank@NUS Repository. https://doi.org/10.1002/pssc.200303431|
|Abstract:||Schottky-type UV photodetectors with three AlGaN layer structures were designed, simulated and investigated to develope a best performing UV photodetector by inserting a low temperature ultrathin AlGaN interlayer between the active AlGaN and GaN layers. Compared to the direct growth of AlGaN layer on GaN buffer, layer structures with an AlGaN interlayer showed an improved crystal quality resulting in a sharper Raman E2 phonon mode, reduced reverse leakage currents and better photo responsivity with an UV/visible rejection ratio of 4.7 × 104 and a cutoff wavelegth of 290 nm. The experimental results proved that the introduction of an AlGaN interlayer is important for the quality enhancement of active AlGaN surfaces resulting in an improved UV/visible rejection ratio and sharper change of photo responsivity. Further optimisation of the AlGaN photo detectors would be possible by inserting a highly doped AlGaN layer as well as ultrathin AlGaN interlayer in a limited overall thickness to avoid surface cracks. © 2003 WILEY-VCH Verlag GmbH & Co. KGaA.|
|Source Title:||Physica Status Solidi C: Conferences|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Jan 16, 2019
WEB OF SCIENCETM
checked on Jan 9, 2019
checked on Dec 22, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.