Please use this identifier to cite or link to this item: http://scholarbank.nus.edu.sg/handle/10635/80653
Title: Laser cleaning of etch-induced polymers from via holes
Authors: Lu, Y.F. 
Lee, Y.P.
Zhou, M.S.
Issue Date: 1-Feb-1998
Source: Lu, Y.F.,Lee, Y.P.,Zhou, M.S. (1998-02-01). Laser cleaning of etch-induced polymers from via holes. Journal of Applied Physics 83 (3) : 1677-1684. ScholarBank@NUS Repository.
Abstract: The demand for new wafer cleaning technology after plasma etching increases as the industry enters into submicron processes. The success of low-resistance interconnecting high-density ultralarge-scale integrated devices depends on the cleanliness of via holes. A new approach in removing the sidewall and bottom polymers resulting from reactive ion etching of via holes, using a noncontact dry laser cleaning technique is reported and investigated in this study. Pulsed excimer laser irradiation at 248 nm is found to be capable of removing the polymers by subthreshold ablation, even at fluences limited by the damage threshold of the underlying Al-Cu metal film with titanium nitride (TiN) antireflective coating of 250-280 mJ cm-2. The various mechanisms possibly involved in the laser removal of the via-etch-induced polymer below its ablation threshold are discussed. Experimental results also show that the ablation rate when irradiating at an angle is not only comparable to that at vertical incidence, but even register higher values for most of the ablation rate data obtained. Thus the performance in terms of ablation rate does not slacken when the incident radiation is done at an angle to expose the sidewall polymers of the via holes to laser irradiation. Comparing ablation results obtained using Nd-YAG laser and excimer laser shows that although the shorter 7 ns Nd-YAG laser pulse gives a greater etch thickness than the 23 ns excimer laser pulse, it also tends to damage the metal films and the silicon substrates of the via wafers more easily. The damage threshold using the third and fourth harmonics of the Nd-YAG laser at 355 and 266 nm was just above 100 mJ cm-2 after 20 pulses. © 1998 American Institute of Physics.
Source Title: Journal of Applied Physics
URI: http://scholarbank.nus.edu.sg/handle/10635/80653
ISSN: 00218979
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

Page view(s)

20
checked on Jan 14, 2018

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.