Please use this identifier to cite or link to this item:
|Title:||Influence of laser melting on the sulphide inclusions in AISI 416|
|Source:||Wijesinghe, S.L.,Tan, Y.T.,Ng, G.K.L.,Blackwood, D.J. (2011). Influence of laser melting on the sulphide inclusions in AISI 416. 18th International Corrosion Congress 2011 3 : 2032-2036. ScholarBank@NUS Repository.|
|Abstract:||AISI 416 is a high sulphur martensitic stainless steel with elliptical shaped sulphide inclusions over 2 μm in length. After laser melting the sulphide inclusions became spherical and reduced in size to below 0.5 μm in diameter. SEM investigations showed that the total number of inclusions increased dramatically and it was calculated that the total volume of sulphur in the stainless steel had not changed during the laser treatment. The pitting potential was increased by over 200 mV with an inverse linear dependency on the average inclusion size.|
|Source Title:||18th International Corrosion Congress 2011|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Feb 23, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.