Please use this identifier to cite or link to this item:
|Title:||Real-time geometric error compensation in micro grooving the workpiece with large surface area|
Large surface area
|Citation:||Kang, D.B.,Son, S.M.,Ahn, J.H. (2007). Real-time geometric error compensation in micro grooving the workpiece with large surface area. Key Engineering Materials 339 : 314-320. ScholarBank@NUS Repository. https://doi.org/10.4028/0-87849-430-8.314|
|Abstract:||A workpiece with a large surface area is likely to be uneven due to form error and waviness. These geometric disturbances can cause inaccurate micro shapes to be formed when micro features are micro-grooved into the surface and cause the resulting workpiece to fail to function as desired. Thus, the real-time monitoring and compensation is required to guarantee the form accuracy of micro features while machining the workpiece with a large surface area. In this study, a method is suggested for real-time measurement and compensation of geometric errors for the micro grooving of a large flat surface using a laser displacement sensor placed ahead of the cutting tool. Experimental results show that the compensated surface profiles fit the measured ones within an allowable tolerance even at cutting speeds as high as 200 mm/s.|
|Source Title:||Key Engineering Materials|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Dec 10, 2018
checked on Nov 24, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.