Please use this identifier to cite or link to this item:
https://doi.org/10.1109/ECTC.2008.4550103
DC Field | Value | |
---|---|---|
dc.title | Optimization of reliability of copper-low-k flip chip package with variable interconnect compliance | |
dc.contributor.author | Ong, J.M.G. | |
dc.contributor.author | Tay, A.A.O. | |
dc.contributor.author | Zhang, X. | |
dc.contributor.author | Kripesh, V. | |
dc.contributor.author | Lim, Y.K. | |
dc.contributor.author | Tan, J.B. | |
dc.contributor.author | Sohn, D.K. | |
dc.date.accessioned | 2014-06-19T05:38:40Z | |
dc.date.available | 2014-06-19T05:38:40Z | |
dc.date.issued | 2008 | |
dc.identifier.citation | Ong, J.M.G., Tay, A.A.O., Zhang, X., Kripesh, V., Lim, Y.K., Tan, J.B., Sohn, D.K. (2008). Optimization of reliability of copper-low-k flip chip package with variable interconnect compliance. Proceedings - Electronic Components and Technology Conference : 1031-1035. ScholarBank@NUS Repository. https://doi.org/10.1109/ECTC.2008.4550103 | |
dc.identifier.isbn | 9781424422302 | |
dc.identifier.issn | 05695503 | |
dc.identifier.uri | http://scholarbank.nus.edu.sg/handle/10635/73729 | |
dc.description.abstract | The trend toward finer pitch and higher performance integrated circuits (ICs) devices has driven the semiconductor industry to incorporate copper and low-k dielectric materials. However, the low-k materials have lower modulus and poorer adhesion compared to the common dielectric materials. Thus, thermo-mechanical failure is one of the major bottlenecks for development of fine-pitch, large-die Cu/low-k flip chip packages. In this paper, 3D finite element analyses were performed to investigate the reliability of 65nm, 21×21mm 9metal Cu/ low-k, chips with 150um interconnect pitch in a FCBGA package with a 750um die thickness and 1.0mm substrate thickness. Three parametric cases involving different geometries of solder joints were analyze: (A) All 20 rows with spherical solder joints, (B) 10 hourglass joints followed by 10 spherical joints, and (C) 10 spherical joints followed by 10 hourglass joints. The spherical joints are stiffer than the hourglass joints. It was found that Case C gave the lowest inelastic energy dissipation (AW) for the critical solder joint implying that Case C will have the longest fatigue life. It was also found that Case C gave the lowest maximum stress in the low-k material and it was further shown that reliability will be enhanced wim decrease in die thickness and substrate thickness. © 2008 IEEE. | |
dc.description.uri | http://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1109/ECTC.2008.4550103 | |
dc.source | Scopus | |
dc.type | Conference Paper | |
dc.contributor.department | MECHANICAL ENGINEERING | |
dc.description.doi | 10.1109/ECTC.2008.4550103 | |
dc.description.sourcetitle | Proceedings - Electronic Components and Technology Conference | |
dc.description.page | 1031-1035 | |
dc.description.coden | PECCA | |
dc.identifier.isiut | 000257141200163 | |
Appears in Collections: | Staff Publications |
Show simple item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.