Please use this identifier to cite or link to this item: http://scholarbank.nus.edu.sg/handle/10635/73663
Title: Nanoindentation study of polymer based nanocomposites
Authors: Nai, M.H.
Lim, C.T. 
Zeng, K.Y.
Tan, V.B.C. 
Keywords: Elastic Modulus
Hardness
Nanoindentation
Nylon-6 Nanocomposites
Polycarbonate
Issue Date: 2005
Source: Nai, M.H.,Lim, C.T.,Zeng, K.Y.,Tan, V.B.C. (2005). Nanoindentation study of polymer based nanocomposites. Journal of Metastable and Nanocrystalline Materials 23 : 363-366. ScholarBank@NUS Repository.
Abstract: Nanoindentation is a useful technique to measure hardness as well as elastic and time-dependent plastic properties of materials with nanometer resolution. The measurement of elastic modulus of polymeric materials remains challenging due to their viscoelastic behavior. Clay reinforced nylon6 nanocomposites are found to have great improvement in the elastic modulus and tensile strength due to exfoliated hybrid structure. However, its mechanical properties have not been well investigated. In the present study, hardness and elastic modulus of nylon6-5wt%clay nanocomposites were investigated using nanoindentation. Creep effects of the nanocomposites on the unloading stiffness, which directly relates to the elastic modulus, were studied under various unloading rates and holding periods. It was found that the elastic modulus and hardness of nylon6-5wt%clay nanocomposites increased by 58% and 80%, respectively, as compared to pure nylon6. Experimental results for both polycarbonate and nylon6-5wt%clay nanocomposites showed that loading rate had no significant effects on the unloading stiffness. However, stiffness decreased to more consistent values after longer holding periods (more than 30 sec) and at faster unloading rates. The results indicated that creep behavior of the polymers affects the measurement of the unloading stiffness and may possibly overestimate the elastic modulus. Errors in the stiffness measurements from nanoindentation could be minimized with appropriate loading, unloading and holding conditions.
Source Title: Journal of Metastable and Nanocrystalline Materials
URI: http://scholarbank.nus.edu.sg/handle/10635/73663
ISSN: 14226375
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

Page view(s)

11
checked on Dec 16, 2017

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.