Please use this identifier to cite or link to this item:
|Title:||Improving force control using zero coupling impedance criterion in series manipulator systems|
|Citation:||Li, R.,Vuong, N.D.,Chew, C.M.,Lim, C.W. (2013). Improving force control using zero coupling impedance criterion in series manipulator systems. IFAC Proceedings Volumes (IFAC-PapersOnline) : 549-554. ScholarBank@NUS Repository. https://doi.org/10.3182/20130410-3-CN-2034.00090|
|Abstract:||Using industrial manipulators for force control normally suffers from large impedance due to their large inertia, friction and stiffness. Series macro-mini system has been proposed as a solution to lower the robot impedance. However, the force control performance of a series macro-mini manipulator system may be compromised due to the low frequency resonance modes of the macro manipulator. Although changing the dynamics of the macro manipulator has been proved to be useful to improve the force control performance, it cannot be easily done due to closed control architecture. In this paper, we propose a Zero Coupling Impedance criterion to address the aforementioned problem. Since modifying the dynamic of the macro is not feasible, the coupling between the macro and mini is changed instead. Experiments are used to validate the proposed criterion. The results suggest that by satisfying the Zero Coupling Impedance criterion, force control performance of the series manipulator system will not be limited by macro manipulator. This research provides a general guideline of designing and controlling an end effector that is carried by a manipulator for force control tasks. © 2013 IFAC.|
|Source Title:||IFAC Proceedings Volumes (IFAC-PapersOnline)|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Dec 17, 2018
checked on Nov 9, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.