Please use this identifier to cite or link to this item:
|Title:||Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys|
|Source:||Yan, C.,Yan, L.L.,Ye, L.,Lu, L.,Lai, M.O.,Mai, Y.W. (2003). Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys. Materials Science Forum 437-438 : 113-116. ScholarBank@NUS Repository.|
|Abstract:||In this work, nano-crystalline Mg-Al-Nd alloys were fabricated using mechanical alloying method. Phase structure of the extruded rods was examined using X-ray diffraction (XRD) and the microstructures were observed using transmission electronic microscopy (TEM). The element distributions were also examined by an energy dispersive spectroscopy (EDS) system. The results showed that nano-crystalline Mg-Al-Nd alloys were successfully fabricated using the mechanical alloying method. The grain size of the Mg-Al-Nd alloys could be reduced from a few microns down to about 150 nm after 30 hours ball milling. There was a reduction of grain size with increasing Nd content from 0.5 to 5%. Higher yield strength was obtained in the alloys with a high Nd content due to grain refinement and Nd rich precipitate phases.|
|Source Title:||Materials Science Forum|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Dec 9, 2017
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.