Please use this identifier to cite or link to this item:
https://doi.org/10.4028/www.scientific.net/KEM.447-448.534
DC Field | Value | |
---|---|---|
dc.title | Automatic surface characterization for micro-structured surfaces fabricated by fast tool servo diamond turning | |
dc.contributor.author | Yu, D.P. | |
dc.contributor.author | Wong, Y.S. | |
dc.contributor.author | Hong, G.S. | |
dc.date.accessioned | 2014-06-19T05:32:26Z | |
dc.date.available | 2014-06-19T05:32:26Z | |
dc.date.issued | 2010 | |
dc.identifier.citation | Yu, D.P., Wong, Y.S., Hong, G.S. (2010). Automatic surface characterization for micro-structured surfaces fabricated by fast tool servo diamond turning. Key Engineering Materials 447 448 : 534-538. ScholarBank@NUS Repository. https://doi.org/10.4028/www.scientific.net/KEM.447-448.534 | |
dc.identifier.isbn | 9780878492565 | |
dc.identifier.issn | 10139826 | |
dc.identifier.uri | http://scholarbank.nus.edu.sg/handle/10635/73212 | |
dc.description.abstract | Fast tool servo diamond turning is a promising machining method for precision and complex micro-structured surfaces with spatial wavelength above tens of microns. It is crucial to measure and characterize the micro-structured surfaces to sub-micrometer form accuracy. The general purpose measurement instruments are not able to evaluate the true form accuracy between the measured surface and designed surface. Therefore, in this paper an automatic surface characterization method is proposed to evaluate the form accuracy for micro-structured surfaces. The fabricated surfaces can be measured by any high-resolution measurement instruments. After the surface measurement, an iterative closest point (ICP) algorithm is modified to align the measured surfaces to the designed surfaces with the form error evenly distributed over the whole surface. After alignment, the designed surface height corresponding to each measured point is calculated to form the areal error map. 3D surface parameters are chosen and calculated from the error map to characterize the surface form error. Experimental results demonstrate the effectiveness of the proposed surface characterization method. © (2010) Trans Tech Publications. | |
dc.source | Scopus | |
dc.subject | Diamond turning | |
dc.subject | Fast tool servo | |
dc.subject | Iterative closest point | |
dc.subject | Micro-structured surfaces | |
dc.subject | Surface characterization | |
dc.type | Conference Paper | |
dc.contributor.department | MECHANICAL ENGINEERING | |
dc.description.doi | 10.4028/www.scientific.net/KEM.447-448.534 | |
dc.description.sourcetitle | Key Engineering Materials | |
dc.description.volume | 447 448 | |
dc.description.page | 534-538 | |
dc.description.coden | KEMAE | |
dc.identifier.isiut | 000291897500104 | |
Appears in Collections: | Staff Publications |
Show simple item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.