Please use this identifier to cite or link to this item:
|Title:||A study on the grinding of glass using electrolytic in-process dressing|
|Authors:||Kumar, A.S. |
|Keywords:||Current duty ratio|
Optical glass grinding
|Citation:||Kumar, A.S.,Lim, H.S.,Rahman, M.,Fathima, K. (2002-10). A study on the grinding of glass using electrolytic in-process dressing. Journal of Electronic Materials 31 (10 SPEC.) : 1039-1046. ScholarBank@NUS Repository.|
|Abstract:||Grinding of brittle materials such as glass is gaining importance due to the rapid developments in the areas of machining of storage devices, microlenses, and optical communication devices. Grinding of such glasses is difficult because grinding wheels wear out easily due to the hard and brittle nature of the materials being machined. Grinding wheels with fine abrasive size are required in order to achieve ductile mode grinding. Problems such as wheel loading and glazing can be encountered while grinding with fine abrasive wheels. Electrolytic in-process dressing (ELID) is an efficient method to dress the grinding wheel while performing grinding. In this paper, a fundamental study on the mechanism of the ELID grinding technique is discussed in detail. Several sets of experiments have been performed to determine the optimal grinding conditions. From the experiments, it has been established that surface roughness could be further improved if the current duty ratio to dress the grinding wheel were increased. The force patterns and the changes in the profile of the grinding wheel during machining are also presented and discussed in detail.|
|Source Title:||Journal of Electronic Materials|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Dec 8, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.