Please use this identifier to cite or link to this item:
|Title:||Reconfigurable multiband SAW filters for LTE applications|
|Source:||Lu, X.,Galipeau, J.,Mouthaan, K.,Briot, E.H.,Abbott, B. (2013). Reconfigurable multiband SAW filters for LTE applications. PAWR 2013 - Proceedings: 2013 IEEE Topical Conference on Power Amplifiers for Wireless and Radio Applications - 2013 IEEE Radio and Wireless Week, RWW 2013 : 82-84. ScholarBank@NUS Repository. https://doi.org/10.1109/PAWR.2013.6490196|
|Abstract:||Reconfigurable surface acoustic wave (SAW) filters are presented for the 700 MHz frequency band currently allocated to Long Term Evolution (LTE). Unlike traditional SAW filters with a fixed center frequency, the proposed filters have a reconfigurable center frequency. First, a novel modular ladder type topology is proposed incorporating SAW resonators and GaAs Single Pole Single Throw (SPST) switches within the basic reconfigurable filter. The measured center frequency in the low band state is 696 MHz and the BW is 3.4%. In the high band state the measured center frequency is 718 MHz and the BW is 2.6%. The center frequency shift is 3.2%. Spurious responses caused by switches are an important design consideration and the root causes of the spurious responses in high band and low band are identified. Then a novel filter topology using Single Pole Double Throw (SPDT) absorptive switches is proposed to remove the spurious responses in the high band state. Finally the root cause of the remaining spurious response is analyzed and a solution is proposed. © 2013 IEEE.|
|Source Title:||PAWR 2013 - Proceedings: 2013 IEEE Topical Conference on Power Amplifiers for Wireless and Radio Applications - 2013 IEEE Radio and Wireless Week, RWW 2013|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Dec 13, 2017
checked on Dec 16, 2017
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.