Please use this identifier to cite or link to this item:
|Title:||Dual-band Class III loaded-line phase shifters|
|Authors:||Tang, X. |
Loaded-line phase shifter
|Source:||Tang, X.,Mouthaan, K. (2010). Dual-band Class III loaded-line phase shifters. Asia-Pacific Microwave Conference Proceedings, APMC : 1731-1734. ScholarBank@NUS Repository.|
|Abstract:||A design method for dual-band Class III loaded-line phase shifters is presented. The center line and the loads of the phase shifter are designed to meet dual-band requirements. Two single-pole-double-throw switches are used to switch between two reactive loads in the two phase states. Four possible reactive loads are considered and closed-form formulas are provided to achieve dual-band operation. For practical design purposes, the switches are modeled as short transmission lines, which can transform the impedance of the loads. The closed-form formulas are modified to incorporate these effects. To verify the design method, a 45° dual-band phase shifter operating at 900 MHz and 1800 MHz is designed and measured. The measured phase shift is 46. 1°±2° from 841 MHz to 930 MHz and 44.9°±2° from 1743 MHz to 1924 MHz. The measured return loss is larger than 14.5 dB and 15 dB and the amplitude imbalances are smaller than 0.33 dB and 0.4 dB within the respective bandwidths. © 2010 IEICE Institute of Electronics Informati.|
|Source Title:||Asia-Pacific Microwave Conference Proceedings, APMC|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Jan 13, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.