Please use this identifier to cite or link to this item:
|Title:||Design of a UWB phase shifter using shunt λ/4 stubs|
|Authors:||Tang, X. |
|Citation:||Tang, X., Mouthaan, K. (2009). Design of a UWB phase shifter using shunt λ/4 stubs. IEEE MTT-S International Microwave Symposium Digest : 1021-1024. ScholarBank@NUS Repository. https://doi.org/10.1109/MWSYM.2009.5165873|
|Abstract:||In this paper a novel phase shifter covering the whole UWB frequency range with small phase error is presented. The proposed topology employs a single layer substrate and is easy to fabricate. The phase shifter uses shunt quarter wavelength stubs in the resonator branches and transmission lines (TLs) in the reference branches to achieve phase shifts ranging from 20° to 70° while keeping the return loss above 10 dB. The shunt stubs are used to control the phase response. An additional half wavelength TL is inserted in the large phase shifts to improve the return loss. As examples 22.5° and 45° phase bits are designed and fabricated. Theoretical phase errors of ±2° and ±3° are obtained for the 22.5° and 45° phase bits respectively. The measured phase shifts of the two phase bits are 23.6°±2.7°and 45.8°±4.5° with return losses better than 11 dB and 13.4 dB from 3.1 GHz to 10.6 GHz respectively. The measured amplitude imbalances are less than 0.3 dB. © 2009 IEEE.|
|Source Title:||IEEE MTT-S International Microwave Symposium Digest|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Sep 21, 2018
WEB OF SCIENCETM
checked on Sep 11, 2018
checked on Sep 22, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.