Please use this identifier to cite or link to this item:
|Title:||Acidogenic sequencing batch reactor start-up procedures for induction of 2,4,6-trichlorophenol dechlorination|
|Source:||Mun, C.H., Ng, W.J., He, J. (2008-03). Acidogenic sequencing batch reactor start-up procedures for induction of 2,4,6-trichlorophenol dechlorination. Water Research 42 (6-7) : 1675-1683. ScholarBank@NUS Repository. https://doi.org/10.1016/j.watres.2007.10.019|
|Abstract:||Dechlorination of 2,4,6-trichlorophenol to 4-chlorophenol under acidogenic conditions (pH 5.6-6.5) was successfully induced by manipulating the start-up procedure of an acidogenic sequencing batch reactor (SBR). A stepwise pH reduction from neutral to acidic level during start-up was crucial for inducing dechlorination. Once induced, dechlorination can proceed at pH as low as 5.6 before inhibition occurrs. Optimum pH for maximum dechlorination rate ranged from 6.0 to 6.3. High primary (sucrose) to secondary (2,4,6-trichlorophenol) substrate ratio failed to induce dechlorination. Instead, dechlorination occurred at primary to secondary substrate ratios of less than 103 M/M. A specific maximum trichlorophenol loading rate of 60 μmol/g MLVSS d was achieved before inhibition appeared with onset of acidogenic reactor failure. T-RFLP profile analysis gave evidence that the start-up procedure resulted in the selection of an appropriate microbial community, which resulted in the successful development of an acidogenic consortium capable of degrading 2,4,6-trichlorophenol. © 2007 Elsevier Ltd. All rights reserved.|
|Source Title:||Water Research|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Dec 7, 2017
WEB OF SCIENCETM
checked on Nov 23, 2017
checked on Dec 18, 2017
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.