Please use this identifier to cite or link to this item: http://scholarbank.nus.edu.sg/handle/10635/65284
Title: Case studies of rock-socketed piles
Authors: Leung, C.F. 
Issue Date: Jun-1996
Source: Leung, C.F. (1996-06). Case studies of rock-socketed piles. Geotechnical Engineering 27 (1) : 51-67. ScholarBank@NUS Repository.
Abstract: This paper presents the results of load tests on a large number of instrumented bored piles socketed in sedimentary rocks and granite in Singapore. Many of these piles were load tested to at least 2.5 times the respective working load. The ultimate unit shaft friction values obtained in the rocks are correlated to the unconfined compressive strength of the rock by means of the rock socket adhesion factor. In cases where unconfined compressive strength of the rocks is not available, the unconfined compressive strength is obtained indirectly from other rock parameters such as pressuremeter test data, standard penetration resistance values and point load strength values. Illustrative examples presented in this paper show that pressuremeter test can be a viable alternative to determine the strength of fractured rocks. For weak rock with unconfined compressive strength below 5 MPa, the measured adhesion factors agree reasonably well with those proposed by several existing design methods. For rocks with unconfined compressive strength above 5 MPa, the measured adhesion factors are considerably lower than those proposed by existing design methods. It is believed such rocks have been significantly weakened by chiselling during pile installation.
Source Title: Geotechnical Engineering
URI: http://scholarbank.nus.edu.sg/handle/10635/65284
ISSN: 00465828
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

Page view(s)

130
checked on Dec 15, 2017

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.