Please use this identifier to cite or link to this item: http://scholarbank.nus.edu.sg/handle/10635/65210
Title: Behavior of high-strength concrete I-beams with low shear reinforcement
Authors: Teoh, B.K. 
Mansur, M.A. 
Wee, T.H. 
Keywords: Beam
Crack
High-strength concrete
Reinforcement
Shear
Issue Date: May-2002
Source: Teoh, B.K.,Mansur, M.A.,Wee, T.H. (2002-05). Behavior of high-strength concrete I-beams with low shear reinforcement. ACI Structural Journal 99 (3) : 299-307. ScholarBank@NUS Repository.
Abstract: An experimental investigation was carried out on a total of 10 simply supported I-beams containing low shear reinforcement ratios. These include four reinforced concrete (RC) and six prestressed concrete (PSC) beams with concrete strengths ranging from 43 to 100 MPa. Test results indicate that after critical diagonal cracking, formation of arch action in RC beams provides sufficient reserve shear strength if adequate tension steel is provided. In contrast, due to its higher cracking load that approaches the arch action capacity, the reserve strength of PSC beams depends on the discrete number of the stirrups intercepted by the inclined crack. Using the reserve shear strength index as a measure of safety, American and Canadian code provisions, with respect to the minimum shear reinforcement, are found to be inadequate in guaranteeing a satisfactory margin of safety in PSC beams investigated in this study. Based on the present tests and those available in the literature, an equation is proposed for minimum shear reinforcement to ensure a consistent margin of safety for both RC and PSC beams.
Source Title: ACI Structural Journal
URI: http://scholarbank.nus.edu.sg/handle/10635/65210
ISSN: 08893241
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

Page view(s)

28
checked on Dec 15, 2017

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.