Please use this identifier to cite or link to this item:
|Title:||The cutting force measurement in a fixturing setup with instrumented locators|
Cutting force model
|Citation:||Hameed, R.A.,Mannan, M.A.,Nee, A.Y.C. (2004). The cutting force measurement in a fixturing setup with instrumented locators. International Journal of Advanced Manufacturing Technology 23 (11-12) : 783-793. ScholarBank@NUS Repository.|
|Abstract:||Piezo-electric multi-component dynamometers are commonly used for research and development purposes but their application in a real manufacturing environment is rather limited due to various factors. This paper presents a methodology by which the dynamometer can be replaced effectively by six instrumented locators with uniaxial piezo-electric force sensors in a fixturing setup. A system was developed using the output from six uniaxial force sensors, which are positioned around the workpiece to suit the configuration of the workpiece. Experiments were conducted under actual cutting conditions to validate the equations developed and the analysis was performed to correlate the relationship between the forces measured with a piezo-electric Kistler dynamometer and the forces calculated from the output of the instrumented locators. The force values from the dynamometer and the instrumented locators were recorded for a series of end milling tests under different cutting conditions and the accuracy of the model was studied.|
|Source Title:||International Journal of Advanced Manufacturing Technology|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Dec 29, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.