Please use this identifier to cite or link to this item: https://doi.org/10.1016/j.ijmachtools.2004.05.005
Title: Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools
Authors: Arunachalam, R.M.
Mannan, M.A. 
Spowage, A.C.
Keywords: Facing
Inconel 718
PVD-TiAlN
Residual stresses
Surface finish
Surface integrity
Issue Date: Nov-2004
Source: Arunachalam, R.M., Mannan, M.A., Spowage, A.C. (2004-11). Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools. International Journal of Machine Tools and Manufacture 44 (14) : 1481-1491. ScholarBank@NUS Repository. https://doi.org/10.1016/j.ijmachtools.2004.05.005
Abstract: Considerable attention has been given to the use of ceramic cutting tools for improving productivity in the machining of heat resistant super alloys (HRSA). However, because of their negative influence on the surface integrity, ceramic tools are generally avoided particularly for finishing applications. As a result the main high end manufacturers are more or less dependent on carbide cutting tools for finishing operations. Still the improper use of carbide cutting tools can also result in poor surface integrity. The objective of this investigation is to develop a set of guidelines, which will assist the selection of the appropriate cutting tools and conditions for generating favorable compressive residual stresses. This paper specifically deals with residual stresses and surface finish components of surface integrity when machining (facing) age hardened Inconel 718 using two grades of coated carbide cutting tools specifically developed for machining HRSAs. The cutting conditions were obtained from investigations based on optimum tool performance. The effect of insert shape, cutting edge preparation, type and nose radius on both residual stresses and surface finish was studied at this optimum cutting condition. This investigation, suggested that coated carbide cutting tool inserts of round shape, chamfered cutting edge preparation, negative type and small nose radius (0.8 mm) and coolant will generate primarily compressive residual stresses. © 2004 Elsevier Ltd. All rights reserved.
Source Title: International Journal of Machine Tools and Manufacture
URI: http://scholarbank.nus.edu.sg/handle/10635/61427
ISSN: 08906955
DOI: 10.1016/j.ijmachtools.2004.05.005
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

112
checked on Dec 5, 2017

WEB OF SCIENCETM
Citations

89
checked on Nov 16, 2017

Page view(s)

49
checked on Dec 10, 2017

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.