Please use this identifier to cite or link to this item:
|Title:||Sliding wear behaviour of AZ31B magnesium alloy and nano-composite|
|Keywords:||AZ31B magnesium alloy|
|Citation:||Srinivasan, M., Loganathan, C., Kamaraj, M., Nguyen, Q.B., Gupta, M., Narayanasamy, R. (2012-01). Sliding wear behaviour of AZ31B magnesium alloy and nano-composite. Transactions of Nonferrous Metals Society of China (English Edition) 22 (1) : 60-65. ScholarBank@NUS Repository. https://doi.org/10.1016/S1003-6326(11)61140-0|
|Abstract:||AZ31B magnesium alloy and nano-composite were manufactured by hybrid casting process and hot extruded at 350°C. The sliding wear behaviour of alloy and nano-composite was estimated at room temperature using the standard pin-on-disc wear test equipment. The tests were conducted under a normal load of 10 N at different sliding speeds ranging from 0.60 to 1.2 m/s for distance up to 2000 m. The wear mechanisms of the worn out surface were studied using SEM analysis. The influence of test parameters on wear rate of the pins was established using a linear regression model statistically. Compared with the AZ31B magnesium alloy, the nano-composite shows lower wear rates due to higher hardness improvement caused by the reinforcement. The wear mechanism appears to be a mix-up of ploughing, rows of furrows, delamination and oxidation. © 2012 The Nonferrous Metals Society of China.|
|Source Title:||Transactions of Nonferrous Metals Society of China (English Edition)|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on May 23, 2018
WEB OF SCIENCETM
checked on May 8, 2018
checked on May 12, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.