Please use this identifier to cite or link to this item:
|Title:||Modeling of radial gap formed by material dissolution in simultaneous micro-EDM and micro-ECM drilling using deionized water|
|Citation:||Nguyen, M.D., Rahman, M., Wong, Y.S. (2013). Modeling of radial gap formed by material dissolution in simultaneous micro-EDM and micro-ECM drilling using deionized water. International Journal of Machine Tools and Manufacture 66 : 95-101. ScholarBank@NUS Repository. https://doi.org/10.1016/j.ijmachtools.2012.12.001|
|Abstract:||For enhancing the surface finish of micro-holes, micro-EDM and micro-ECM have been combined in a unique hybrid machining process by using low-resistivity deionized water as bi-characteristic fluid. The affected material layer generated by electric sparks is further dissolved from machined surface owing to the effect of electrochemical reaction. To maintain the dimensional accuracy of micro-holes, short voltage pulses are applied to localize the material dissolution zone and thus the thickness of further removed material layer is of prime importance in deciding the final dimension of micro-holes. This study presents the modeling of radial gap distance in simultaneous micro-EDM and micro-ECM drilling by predicting the thickness of material layer further dissolved by electrochemical reaction. The analytical approach incorporating the double-layer theory, the Butler-Volmer equation and the Faraday's law of electrolysis is used to simulate the radial gap distance for different pulse parameters. The simulation data is then verified with the experimental results. It is observed that the applied pulse parameters directly affect the final dimension of obtained micro-holes. The effectiveness of short voltage pulses in localizing the material dissolution zone is found to be in accordance with the double-layer charging characteristic. When the pulse duration is too short, the material dissolution is negligible and SEDCM has no effect on improving the inner surface of micro-hole. © 2012 Elsevier Ltd.|
|Source Title:||International Journal of Machine Tools and Manufacture|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Jun 15, 2018
WEB OF SCIENCETM
checked on May 28, 2018
checked on May 25, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.