Please use this identifier to cite or link to this item:
|Title:||Enhancing the microstructural and mechanical response of a Mg/SiC formulation by the method of reducing extrusion temperature|
D. Mechanical behavior
|Citation:||Lim, S.C.V., Gupta, M. (2001-12). Enhancing the microstructural and mechanical response of a Mg/SiC formulation by the method of reducing extrusion temperature. Materials Research Bulletin 36 (15) : 2627-2636. ScholarBank@NUS Repository. https://doi.org/10.1016/S0025-5408(01)00750-4|
|Abstract:||In the present study, a magnesium-based composite with about 11.5 wt% of SiC particulates was synthesized using an innovative disintegrated melt deposition technique followed by extrusion at different temperatures of 350, 250, 150, and 100°C. Microstructural characterization of the extruded samples showed an increase in alignment of SiC particulates in the direction of extrusion, reduction in number of SiC particulate clusters, and improved distribution of the SiC particulates as the extrusion temperature decreased. Good interfacial integrity and minimal porosity was also observed for all the samples. Mechanical properties characterization revealed that a decrease in extrusion temperature from 350 to 100°C lead to a significant increase in the hardness, elastic modulus, 0.2% yield strength, while the average UTS and ductility remained unaffected. An attempt is made to correlate the effect of decreasing the extrusion temperature with the microstructural and mechanical behavior of the composite. © 2001 Elsevier Science Ltd. All rights reserved.|
|Source Title:||Materials Research Bulletin|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Feb 21, 2019
WEB OF SCIENCETM
checked on Feb 12, 2019
checked on Jan 26, 2019
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.