Please use this identifier to cite or link to this item: https://doi.org/10.1016/j.applthermaleng.2013.09.023
Title: A synergetic hybridization of adsorption cycle with the multi-effect distillation (MED)
Authors: Thu, K. 
Kim, Y.-D.
Amy, G.
Chun, W.G.
Ng, K.C. 
Keywords: Adsorption desalination
Hybrid desalination cycle
Multi-effect distillation
Waste heat recovery
Issue Date: 2014
Source: Thu, K., Kim, Y.-D., Amy, G., Chun, W.G., Ng, K.C. (2014). A synergetic hybridization of adsorption cycle with the multi-effect distillation (MED). Applied Thermal Engineering 62 (1) : 245-255. ScholarBank@NUS Repository. https://doi.org/10.1016/j.applthermaleng.2013.09.023
Abstract: Multi-effect distillation (MED) systems are proven and energy efficient thermally-driven desalination systems for handling harsh seawater feed in the Gulf region. The high cycle efficiency is markedly achieved by latent energy re-use with minimal stage temperature-difference across the condensing steam and the evaporating saline seawater in each stage. The efficacies of MED system are (i) its low stage-temperature-difference between top brine temperature (TBT) and final condensing temperature, (ii) its robustness to varying salinity and ability to handle harmful algae Blooming (HABs) and (iii) its compact foot-print per unit water output. The practical TBT of MED systems, hitherto, is around 65 C for controllable scaling and fouling with the ambient-limited final condenser temperature, usually from 30 to 45 C. The adsorption (ADC) cycles utilize low-temperature heat sources (typically below 90 C) to produce useful cooling power and potable water. Hybridizing MED with AD cycles, they synergistically improve the water production rates at the same energy input whilst the AD cycle is driven by the recovered waste heat. We present a practical AD + MED combination that can be retrofitted to existing MEDs: The cooling energy of AD cycle through the water vapor uptake by the adsorbent is recycled internally, providing lower temperature condensing environment in the effects whilst the final condensing temperature of MED is as low as 5-10 C, which is below ambient. The increase in the temperature difference between TBT and final condensing temperature accommodates additional MED stages. A detailed numerical model is presented to capture the transient behaviors of heat and mass interactions in the combined AD + MED cycles and the results are presented in terms of key variables. It is observed that the water production rates of the combined cycle increase to give a GOR of 8.8 from an initial value of 5.9. © 2013 Elsevier Ltd. All rights reserved.
Source Title: Applied Thermal Engineering
URI: http://scholarbank.nus.edu.sg/handle/10635/59301
ISSN: 13594311
DOI: 10.1016/j.applthermaleng.2013.09.023
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

17
checked on Dec 6, 2017

WEB OF SCIENCETM
Citations

12
checked on Nov 21, 2017

Page view(s)

80
checked on Dec 10, 2017

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.