Please use this identifier to cite or link to this item:
https://doi.org/10.1063/1.1141458
DC Field | Value | |
---|---|---|
dc.title | Twin-wire resistance probe rotameter | |
dc.contributor.author | Liu, C.Y. | |
dc.contributor.author | Ng, K.L. | |
dc.contributor.author | Poo, A.N. | |
dc.date.accessioned | 2014-06-17T05:19:16Z | |
dc.date.available | 2014-06-17T05:19:16Z | |
dc.date.issued | 1990 | |
dc.identifier.citation | Liu, C.Y., Ng, K.L., Poo, A.N. (1990). Twin-wire resistance probe rotameter. Review of Scientific Instruments 61 (2) : 887-891. ScholarBank@NUS Repository. https://doi.org/10.1063/1.1141458 | |
dc.identifier.issn | 00346748 | |
dc.identifier.uri | http://scholarbank.nus.edu.sg/handle/10635/58866 | |
dc.description.abstract | The principle of the twin-wire resistance probe rotameter is developed in this article. The main feature of the design is a low-cost flowmeter with an electrical output capability. From performance tests conducted on both a simulated rotameter and an actual rotameter constructed based on the principle described, good agreement was observed between experimental and analytical results. It was found that the output voltage from this flowmeter depends mainly upon the material and the size of the float used, and the angle of the taper of the surface of the meter. | |
dc.description.uri | http://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1063/1.1141458 | |
dc.source | Scopus | |
dc.type | Article | |
dc.contributor.department | MECHANICAL & PRODUCTION ENGINEERING | |
dc.description.doi | 10.1063/1.1141458 | |
dc.description.sourcetitle | Review of Scientific Instruments | |
dc.description.volume | 61 | |
dc.description.issue | 2 | |
dc.description.page | 887-891 | |
dc.identifier.isiut | A1990CN95400035 | |
Appears in Collections: | Staff Publications |
Show simple item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.