Please use this identifier to cite or link to this item: http://scholarbank.nus.edu.sg/handle/10635/58366
Title: Identification of a dynamic system using ambient vibration measurements
Authors: Feng, M.Q.
Kim, J.-M.
Xue, H. 
Issue Date: Dec-1998
Source: Feng, M.Q.,Kim, J.-M.,Xue, H. (1998-12). Identification of a dynamic system using ambient vibration measurements. Journal of Applied Mechanics, Transactions ASME 65 (4) : 1010-1021. ScholarBank@NUS Repository.
Abstract: This paper demonstrates how ambient vibration measurements at a limited number of locations can be effectively utilized to estimate parameters of a finite element model of a large-scale structural system involving a large number of elements. System identification using ambient vibration measurements presents a challenge requiring the use of special identification techniques, which can deal with very small magnitudes of ambient vibration contaminated by noise without the knowledge of input forces. In the present study, the modal parameters such as natural frequencies, damping ratios, and mode shapes of the structural system were estimated by means of appropriate system identification techniques including the random decrement method. Moreover, estimation of parameters such as the stiffness matrix of the finite element model from the system response measured by a limited number of sensors is another challenge. In this study, the system stiffness matrix was estimated by using the quadratic optimization involving the computed and measured modal strain energy of the system, with the aid of a sensitivity relationship between each element stiffness and the modal parameters established by the second-order inverse modal perturbation theory. The finite element models thus identified represent the actual structural system very well, as their calculated dynamic characteristics satisfactorily matched the observed ones from the ambient vibration test performed on a large-scale structural system subjected primarily to ambient wind excitations. It is noted that newly developed optical fiber accelerometers were used for this ambient vibration test. The dynamic models identified by this study will be used for design of an active mass damper system to be installed on this structure for suppressing its wind vibration. © 1998 by ASME.
Source Title: Journal of Applied Mechanics, Transactions ASME
URI: http://scholarbank.nus.edu.sg/handle/10635/58366
ISSN: 00218936
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

Page view(s)

29
checked on Dec 8, 2017

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.