Please use this identifier to cite or link to this item:
|Title:||Effect of processing on the microstructural variation and heat-treatment response of a hypercutectic AlSi alloy|
|Authors:||Gupta, M. |
|Citation:||Gupta, M.,Lavernia, E.J. (1995-10). Effect of processing on the microstructural variation and heat-treatment response of a hypercutectic AlSi alloy. Journal of Materials Processing Tech. 54 (1-4) : 261-270. ScholarBank@NUS Repository.|
|Abstract:||In the present study, the effect of the primary processing route on the microstructural variation and heat-treatment response of a commercial AlSi alloy (designated as A390) is investigated. The AlSi alloy selected for the present investigation was processed using conventional casting and spray atomization and deposition routes. Microscopic investigation carried out on the as-spray deposited samples revealed that the secondary phases such as silicon were at least an order of magnitude finer than that observed in the as-cast samples. In addition, as-spray deposited material revealed a considerable spheroidization of the secondary phases in the matrix as compared to the needle-shaped morphology exhibited by the as-cast material. The results of the heat-treatment studies indicated a faster solutionizing kinetics (dissolution) and a similar aging (precipitation) response of spray-deposited samples when compared to the cast samples. The correlation between the microstructural characteristics and the heat-treatment behavior of the cast and spray processed samples are discussed, taking into account the solidification conditions present during the respective processing techniques. © 1995.|
|Source Title:||Journal of Materials Processing Tech.|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Feb 9, 2019
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.