Please use this identifier to cite or link to this item:
|Title:||A pulse shaping technique for spur suppression in injection-locked synthesizers|
|Keywords:||Injection-locked oscillator (ILO)|
Sub-harmonic injection locking
|Citation:||Izad, M.M., Heng, C.-H. (2012-02). A pulse shaping technique for spur suppression in injection-locked synthesizers. IEEE Journal of Solid-State Circuits 47 (3) : 652-664. ScholarBank@NUS Repository. https://doi.org/10.1109/JSSC.2011.2177178|
|Abstract:||Frequency synthesizers based on sub-harmonic injection- locked oscillators can reduce power and area effectively. However, they suffer from unwanted side-bands caused by undesirable harmonics in the injection pulse. This paper presents a pulse shaping technique that reduces these undesirable harmonics in the injection pulse and produces low-spur synthesized output. The robustness of the proposed technique and the impact of circuit non-idealities are also discussed in depth. A test chip tailored to the first band group of WiMedia UWB is fabricated in 0.13- m CMOS technology to verify the effectiveness of this technique. Experimental results show that the proposed pulse shaping attenuates the spurs by 22 dB and suppresses them below 47 dBc. The prototype achieves a switching time of less than 4.7 ns and phase noise of 122 dBc/Hz@1 MHz offset at 4.488 GHz. The chip occupies an active area of 0.15 mm and draws only 18 mA from a 1.2-V supply. © 2012 IEEE.|
|Source Title:||IEEE Journal of Solid-State Circuits|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Oct 17, 2018
WEB OF SCIENCETM
checked on Oct 9, 2018
checked on Oct 13, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.