Please use this identifier to cite or link to this item:
|Title:||Factors affecting ceramic tile adhesion for external cladding|
|Source:||Chew, M.Y.L. (1999). Factors affecting ceramic tile adhesion for external cladding. Construction and Building Materials 13 (5) : 293-296. ScholarBank@NUS Repository. https://doi.org/10.1016/S0950-0618(99)00023-9|
|Abstract:||The effect of the exposure temperature during and after the application of a tiling system on the development of bond strength of the adhesive was evaluated. It was shown that adhesive with approximately 50% of the water replaced by a polymer latex has the most consistent performance in the achievement of bond strength. Adhesive with 100% of the water replaced by a polymer latex was found to dry up too rapidly to allow sufficient time for the adhesive to interact with the substrate at the adhesive/substrate interface. The results reflect the importance of a proper mix design especially when works have to be carried out under hot and dry weather. The effects of moisture and movement due to shrinkage and creep are also discussed.|
|Source Title:||Construction and Building Materials|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Feb 19, 2018
WEB OF SCIENCETM
checked on Feb 7, 2018
checked on Feb 20, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.