Please use this identifier to cite or link to this item:
|Title:||Design of broadband probe-fed plate antenna with stub|
|Authors:||Chen, Z.N. |
|Citation:||Chen, Z.N., Chia, M.Y.W. (2001-08). Design of broadband probe-fed plate antenna with stub. IEE Proceedings: Microwaves, Antennas and Propagation 148 (4) : 221-226. ScholarBank@NUS Repository. https://doi.org/10.1049/ip-map:20010542|
|Abstract:||A suspended probe-fed plate antenna with a stub is proposed for broadband applications. The radiating plate, which acts as a typical radiator, is designed based on standard rules for designing conventional microstrip antennas. The plate is suspended above a ground plane at a height of around 0.07 λ. Owing to the large spacing between the plate and ground plane, a coaxial probe is used to excite the plate instead of the microstrip line often employed on an electrically thin dielectric substrate. To compensate for the large input inductance stemming from the long probe, a conducting stub is used as a broadband impedance matching network. The stub is attached to one of the radiating edges of the plate and is coplanar with the plate. Using transmission-line theory, the stub can be designed to function as a transmission-line type transformer. This method is used to design a rectangular suspended probe-fed plate antenna. Experimental results show that this design is capable of achieving a VSWR = 2:1 impedance bandwidth of about 25%, relatively stable radiation patterns, and maximum gains of 6.8-8.9 dBi across the bandwidth.|
|Source Title:||IEE Proceedings: Microwaves, Antennas and Propagation|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Jul 17, 2018
WEB OF SCIENCETM
checked on Jun 27, 2018
checked on Jun 29, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.