Please use this identifier to cite or link to this item:
https://scholarbank.nus.edu.sg/handle/10635/107008
Title: | Easy glass formation in magnesium-based Mg-Ni-Nd alloys | Authors: | Li, Y. Liu, H.Y. Jones, H. |
Issue Date: | 1996 | Citation: | Li, Y.,Liu, H.Y.,Jones, H. (1996). Easy glass formation in magnesium-based Mg-Ni-Nd alloys. Journal of Materials Science 31 (7) : 1857-1863. ScholarBank@NUS Repository. | Abstract: | A number of magnesium-based alloys containing up to 20 at % Ni and 15 at% Nd were cast directly into a wedge shaped mould and also rapidly solidified by chill-block melt-spinning to produce ribbons between 30 and 100 μm in thickness. The formation of the amorphous state in the wedge and ribbons was confirmed by X-ray diffraction and differential scanning calorimetry. The measured tensile fracture strength and microhardness of these ribbons were found to be in the range 330-630 MPa and 190-250 kg mm-2, respectively, which are significantly higher than for conventional magnesium alloys. Critical cooling rates for the glass formation of these alloys were obtained from wedge section thickness, Bridgman growth, thermal analysis data by differential thermal analysis and computational methods. The significance of several parameters for the glass-forming ability of these alloys is discussed. © 1996 Chapman & Hall. | Source Title: | Journal of Materials Science | URI: | http://scholarbank.nus.edu.sg/handle/10635/107008 | ISSN: | 00222461 |
Appears in Collections: | Staff Publications |
Show full item record
Files in This Item:
There are no files associated with this item.
Google ScholarTM
Check
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.